BD99950MUV-E2
BD99950MUV-E2屬性
- QFN
- ROHM
BD99950MUV-E2描述
型號 | BD99950MUV-E2
STATUS | 推薦品
封裝 | VQFN20PV3535
包裝數量 | 2500
最小獨立包裝數量 | 2500
包裝形態 | TAPING
ROHS | YES
The BD99950MUV is a high-efficiency, synchronous Narrow VDC system voltage regulator and battery charger controller. It has two charge pumps which separately drive N-channel MOSFETs for automatic system power source selection. Charge voltage, charge current, AC adapter current and minimum system voltage can be programmed through SMBus. With a small inductor, PWM switching frequency can also be programmed by SMBus up to 1.2MHz.
特點:
N-channel MOSFETs available for Battery or
Adapter Selection via Internal Charge Pumps
Fast DPM Transient Response under Turbo Mode (<100μs)
Linear Mode Trickle Charge via BGATE Charge Pump
Low Operating Current BGATE Charge Pump at 17μA (typical)
MLCC Output Capacitor
High Light Load Efficiency for Energy Star and ErP Lot6
Fast Load Current Transient Response under
No Battery or Dead Battery conditions
NMOS-NMOS Synchronous Step-Down Controller
Programmable 600kHz-1.2MHz Switching Frequency
Programmable Charge Voltage (16mV resolution),
Charger Current (64mA resolution),
Input Current (64mA resolution),
Minimum System Voltage (64mV resolution)
±0.5% Charge Voltage Accuracy
±3% Charge Current Accuracy
±3% Input Current Accuracy
±0.5% Minimum System Voltage Accuracy
±2% 20x Input Current Amplifier Output Accuracy
Integrated Loop Compensation
Battery Learn Function
AC Adapter Operating Range : 6.0V to 24.0V
Off-State Battery Discharge Current at 15μA
20pin 3.5mm×3.5mm QFN Package